Hamlet HPS01PP2 Manual de usuario descargar pdf (Pagina 77)

Reset Button

Reboot the Print server

1. Verify the power of print server is turned on.

2. Press the reset button once, and then release it.

WARNING: This will restart the print server and stop all on-going and pending print jobs!

Perform a Factory Default

1. Disconnect the external power adapter.

2. Hold down the reset button.

3. Reconnect the external power adapter. Wait about 5 seconds.

4. Release the reset button.

5. The print server will restart.

WARNING: This will erase all settings of print server to default and should be performed

with caution!

After performing a factory default, the default settings will be:

• DHCP client: off

• IP address: 192.168.0.10

• Subnet Mask: 255.255.255.0

1 2 ... 72 73 74 75 76 77 78 79

Sin comentarios

Hamlet HPS01PP2 Manual de usuario Pagina 77